Last year, GE made a commitment to becoming carbon-neutral in its own operations by 2030. In GE’s 2020 Sustainability Report, released this summer, the company is going even further, with an ambition to be net zero by 2050, including Scope 3 emissions from the use of sold products. GE’s tradition of innovation will play a big role as engineers find new ways to help solve looming challenges like the energy transition to address climate change.

“I feel really privileged to be part of GE at this pivotal moment for our people, communities and planet,” says Roger Martella, GE’s chief sustainability officer. “I am one of roughly 174,000 employees who get to contribute to these solutions, which are not only good for business but good for the planet. It’s a humbling opportunity. To be honest, we know the stakes are high, and we know that we have to succeed.”

Here are examples of some of the technologies GE has been working on.

The Haliade-X Factor

Haliade-X wind turbineTop and above images: The Haliade-X turbine. Image credits: GE Renewable Energy.

GE’s Haliade-X offshore wind turbine was designed to evolve with the market, and evolve it has. The initial model produced 12 megawatts — and even at that level, a single rotation of the machine’s blades could generate enough power to supply the equivalent of one U.K. household for two days. But when GE Renewable Energy engineers tested a Haliade-X prototype, they found it could be optimized to produce 13 MW. Now an even more powerful version will be rated at 14 MW — and this machine has just been selected for Dogger Bank C, the 1.2-gigawatt third phase of the U.K.’s Dogger Bank wind farm. (At its 13-MW rating, the Haliade-X had previously been selected for the first two phases of the project.)

Set to be completed in 2026, Dogger Bank is projected to be the largest offshore wind installation in the world, with a planned installed generation capacity of 3.6 GW. The Haliade-X was also recently selected to power Vineyard Wind, an 800-MW farm off the coast of Massachusetts.

Cypress – the world’s most powerful onshore wind turbine

Images: The Cypress turbine. Image credits: GE Renewable Energy.

The Cypress platform, which includes wind turbines with 158 and 164 meter rotor diameters, various hub heights, and power ratings between 4.8 and 6.1 MW, is equipped with both single piece and jointed blade variants, improving logistics and offering increased output from hard to reach sites. 

This feature of the Cypress platform significantly drives down logistical costs by enabling blade assembly onsite and reduces the costs for permitting equipment and road work required for transporting longer blades. Equally important, the wind turbine features blade tips that offer customers greater flexibility to address site wind conditions and requirements.

More than 3 GW of Cypress onshore wind turbines are in the pipeline globally. In Vietnam, GE has secured two 30 MW contracts to supply a total of 12 units of GE’s 5MW-158 Cypress wind turbines to support construction of the Quoc Vinh Soc Trang and Lac Hoa Soc Trang wind farms. Each wind farm is expected to contribute in excess of 100 million kWh of electricity annually to the national grid after once the project is fully operational by third quarter of 2021. GE continues to support Vietnam’s energy transition by bringing the best technology and aims to contribute to the country’s cleaner sources of energy.

New York Leans Into Hydrogen

Brentwood Power StationLong Island’s Brentwood Power Station will begin a demonstration project this fall to test the feasibility of running on a blend of natural gas and green hydrogen. Image credit: GE Gas Power.

Gov. Andrew Cuomo announced in early July that New York will make a big push to bring green hydrogen into the state’s portfolio of sustainable energy solutions — and GE will help along the way. This fall, the Brentwood Power Station on Long Island will begin a demonstration project to test the feasibility of running on a blend of natural gas and green hydrogen, a fuel without carbon. GE Gas Power, whose combustion turbine powers the station, will provide the blending technology and help execute the project.

GE Gas Power is already an industry leader in the use of hydrogen. GE turbines have logged millions of hours of operation using blends of hydrogen, and power facilities set to go online in Ohio and Australia will use blends of hydrogen and natural gas. Hydrogen could remove millions of tons of CO2 from the atmosphere just by the end of the decade. Green hydrogen specifically uses renewable electricity to split water molecules and produce oxygen and hydrogen.

Core Strength

Small modular reactorSmall modular reactors like the BWRX-300 promise to step in and fill the gap when renewable sources are ebbing. Image credit: GE Hitachi Nuclear Energy.

Growing up outside Philadelphia, Jhansi Kandasamy remembers being enchanted by her father’s descriptions of fans as large as houses that cooled the giant 1,100-megawatt nuclear power plant where he was an engineer. She channeled that fascination into her career today at GE Hitachi Nuclear Energy, in Wilmington, North Carolina, where she is developing a new generation of nuclear reactors called small modular reactors, or SMRs.

SMRs produce carbon-free electricity while they are in operation and promise to play an important role in tomorrow’s energy ecosystem. When the wind isn’t blowing and the sun isn’t shining, SMRs will be able to step up and pump out large amounts of energy. “It’s fascinating for me to think about how I can play a small part in this initiative to help care for the earth,” Kandasamy says.

Setting The Pace

power grid“The grid is the largest industrial system built by mankind,” says Vera Silva, chief technology officer of GE Renewable Energy’s Grid Solutions unit. Image credit: Getty Images.

For more than a century, the electrical grid was a one-way street, with current traveling from power plants to consumers. But two decades into the 21st century, it’s rapidly becoming more like a busy highway, with lots of on-ramps and off-ramps. The rise of the renewables age, with tech like rooftop solar, storage batteries and electric vehicles, is adding a new layer of complexity for grid operators. Vera Silva, chief technology officer of GE Renewable Energy’s Grid Solutions unit, says utilities must “operate the grid like a Swiss clock” — and that her business is there to help: “If you think about the transition to decarbonization, how do you convert that ambitious goal, in a way that keeps the grid rock-solid all the time but deals with this rate of change?”

The answer is innovative hardware in combination with digital technology. That’s why Silva’s business is working to solve the challenge in partnership with GE Digital, GE’s software and analytics arm. During everyday operations, the grid generates a mammoth amount of data that can be mined for insights. Past outages and weather data, for instance, can help locate future spots of vulnerability during a storm — so utilities are prepared to speed up repairs and minimize downtime. The ultimate goal? An autonomous grid that can not only fix but predict problems on its own. “Our vision is that we will provide the technologies that enable the grid to continue to be highly reliable, but also resilient — so that it actually becomes even better-performing, more energy-efficient and renewables-centric,” said Patrick Byrne, GE senior vice president and CEO of GE Digital. “That’s a tremendous technology opportunity and challenge for us to take [on].”

Second Wind

Veloia chopped bladesGE Renewable Energy has preliminary agreements with German and French-Swiss companies to dismantle, crush and co-process wind turbine blades from some of the continent’s onshore turbines that are approaching the end of their lives. Image credit: Veolia.

Wind power is a fast-growing source of renewable energy, but that doesn’t mean the industry isn’t trying to lower its carbon footprint. One way to do it involves lowering emissions in the wind turbine’s entire life cycle, from raw material sourcing to manufacturing processes to component transportation. That’s why GE Renewable Energy signed preliminary agreements this month with German and French-Swiss companies to dismantle, shred and co-process the blades from some of the continent’s onshore turbines that are approaching the end of their lives.

The deals come on the heels of a landmark agreement with Veolia North America late last year to recycle blades removed from its onshore turbines in the U.S. GE Renewable Energy’s European partners will follow a similar process: recycling the glass fibers and fillers from the decommissioned blades to be used as raw materials in cement, while recovering the organic materials as an energy source for the manufacturing process. Europe’s cement manufacturers are aiming for net zero emissions by 2050, and GE says manufacturing cement this way could emit as much as 20% less CO2 compared with conventional processes. Jérôme Pécresse, CEO of GE Renewable Energy, called the deals “a truly exciting next step in our journey to introduce new circular life cycle improvements for the wind industry in Europe.”

LEAVE A REPLY